Home / Products / PP Honeycomb Panel Sleeve Box Automatic Production Line
PP Honeycomb Panel Sleeve Box Automatic Production Line
Honeycomb Panel Sleeve Box Automatic Production Line · Sleeve Box Automatic Production Line
Product range: All No.0 machines
This machine is known by other names depending on who is asking — See all names.
The No.0 PP honeycomb sleeve box automatic production line links loading, edge banding, head-and-tail cutting, punching, creasing / window opening and joining into one continuous flow.
- ConfigurationLoading → edge banding → cutting → punching → creasing / window → joining
- Panel thickness3–16 mm
- Working width1.55 m
Panels: PP honeycomb panels and plastic hollow boards, thickness 3–16 mm. Supplied by No.0 Machinery, Shanghai / Changzhou, China.
Overview
The No.0 PP honeycomb sleeve box automatic production line links loading, edge banding, head-and-tail cutting, punching, creasing / window opening and joining into one continuous flow.
Instead of moving panels between standalone machines by hand, the line transfers each panel station to station and keeps the cycle stable, so a small team can run the whole post-processing section.
How it works
The line is built from the proven single stations: a vacuum suction gantry loads one panel at a time, the edge banding machine seals both edges, the cutting machine trims head and tail to length, the punching machine makes the locking holes, the bending / window-opening machine forms creases and openings, and the joining machine closes the frame.
Panels travel on roller conveyors between stations; the line controller coordinates the cycle and interlocks so that a downstream station is never fed a panel it cannot accept.
PP honeycomb panels and plastic hollow boards, thickness 3–16 mm
Packaging, automotive, electronics, electrical appliances, new energy
Machine advantages
One continuous flow
- Loading → edge banding → cutting → punching → creasing / window → joining
- Roller conveyors between stations, no manual carrying
Capacity
- Panel thickness 3–16 mm, working width 1.55 m
- 300 t forming pressure, about 40 seconds per sheet at the forming station
Configuration options
- Start with two or three stations and add the rest later
- Single machines can also be bought and run standalone
The No.0 automatic sleeve box line turns a stack of honeycomb panels into finished box walls in one flow — fewer hands, a stable cycle, the same box every time.
Four problems when stations are not linked
Standalone machines mean panels are carried by hand between stations, the slowest station sets the pace, and quality changes with the operator. A linked line removes the carrying and the waiting.
Continuous transfer
No manual carryingRoller conveyors move the panel from loading to joining without being lifted by hand, so the panel stays flat and the edges are not damaged.
Stable cycle
About 40 seconds per sheetThe line controller keeps the stations in step; the forming station works at about 40 seconds per sheet, so the daily output is predictable.
Consistent quality
Same recipe, same resultRecipes are stored per panel type and thickness, so every operator produces the same crease and the same seam.
Scalable investment
Add stations laterStart with loading, banding and cutting; add punching, creasing and joining as volume grows. The same single machines can also run standalone.
Summary: one flow, one cycle, one standard.
FAQ
Which stations does the line include?
Loading gantry, edge banding, head-and-tail cutting, punching, creasing / window opening and joining; configuration depends on the box type.
What panel size and thickness can the line handle?
Thickness 3–16 mm, working width 1.55 m; forming pressure 300 t.
How many operators are needed?
A small team can run the line; the loading and joining stations do not need a dedicated operator.
Can the machines be bought separately?
Yes. Every station is also available as a standalone machine and can be upgraded to a line later.
Specifications
| Configuration | Loading → edge banding → cutting → punching → creasing / window → joining |
|---|---|
| Panel thickness | 3–16 mm |
| Working width | 1.55 m |
| Forming pressure | 300 t |
| Cycle | 40 seconds per sheet at the forming station |
| Transfer | Roller conveyors between stations |
| Control | Line controller with station interlocks |
Need a quotation or a line layout? Send your panel size, thickness and target output.
Request a quoteWhatsApp







