Home / Products / PP Honeycomb Pallet Sleeve Box Window Opening Machine

PP Honeycomb Pallet Sleeve Box Window Opening Machine

PP Honeycomb Sleeve Box Window Opener · PP Honeycomb Sleeve Box Window Opening Machine · Open Window Machine for PP Honeycomb Pallet Sleeve Box

This machine is known by other names depending on who is asking — See all names.

The No.0 PP honeycomb sleeve box window-opening machine cuts an access window or door opening in the panel and heat-seals the cut edge in the same pass. It is not a simple punch: the edge is closed so the honeycomb core is not exposed.

  • Power supply380 V / 50 Hz
  • Power10 kW
  • Max window length800 mm

Panels: PP honeycomb panels, plastic honeycomb panels, plastic hollow boards, rice-shaped and S-shaped hollow boards. Supplied by No.0 Machinery, Shanghai / Changzhou, China.

PP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening MachinePP Honeycomb Pallet Sleeve Box Window Opening Machine

Overview

The No.0 PP honeycomb sleeve box window-opening machine cuts an access window or door opening in the panel and heat-seals the cut edge in the same pass. It is not a simple punch: the edge is closed so the honeycomb core is not exposed.

In a sleeve box line it stands after edge banding, punching and creasing, and before the joining machine. The quality of the window edge decides how tight and how durable the finished box is.

How it works

Cold cutting a window exposes the honeycomb core: the edge is ragged, the reinforcement ribs show, and moisture and dust can enter the panel — strength and service life drop. That is why the process is heat-seal windowing.

The machine heats the window outline first, then presses the die to form the window and the folding transition, cutting both side edges at the same time. The cut edge closes and sets under residual heat and pressure, and a heat crease is added on the vertical edge so the window can open and close. One sheet is finished in about 40 seconds, heating included.

A heat-sealed window edge resists repeated folding and transport; field feedback from customers puts normal service life at five years or more.

Processable panels

PP honeycomb panels, plastic honeycomb panels, plastic hollow boards, rice-shaped and S-shaped hollow boards

Typical industries

Packaging, automotive, electronics, electrical appliances

Machine advantages

Window quality

  • Heat-sealed cut edge: core and ribs are not exposed, moisture cannot enter
  • Flat, even window edge; the window can open and close on a heat crease

Capacity and tooling

  • Max window 800 × 550 mm; 36 t total pressure on a single die
  • Two standard dies (600 mm and 800 mm); other sizes to order, 800 mm maximum
  • 10 kW, one sheet in 40 seconds including heating

Control and handling

  • PLC + touch screen, manual / automatic switchable
  • Rotating control box: comfortable standing position, less floor space
  • Aviation-grade aluminium die with hardened alloy blades
The No.0 window-opening machine opens an access window that stays sealed: open the side to reach the goods, close the edge to keep the core dry — easier handling, longer service life.

Four problems in manual window cutting

Cutting windows by hand is slow to heat, cracks at the fold, cannot reach deep openings and leaves a ragged die-cut edge. The No.0 window-opening machine addresses these four points.

01

Fast heating

A full sheet in 40 seconds

Carbon-fibre heaters bring the panel up to forming temperature quickly; heating, pressing and die-cutting of one sheet take about 40 seconds, so the cycle stays stable.

02

Improved tooling

Cleaner fold, no cracking

The forming tool follows the panel direction, so pressure is distributed evenly: the fold is formed in one pass, does not crack, and leaves no deep marks on the surface.

03

Deeper forming

Up to 550 mm

Forming depth reaches 550 mm, so tall boxes and deep door openings are pressed in one pass instead of being finished by hand.

04

More pressure

36 t, cutting and forming together

36 t total pressure gives a deeper crease and a cleaner die cut: the window edge is tidy, forming and cutting happen in the same stroke, and post-trimming is reduced.

Summary: with the right process, speed and quality come together.

FAQ

What is the maximum window size?

800 × 550 mm with the standard 800 mm die; window depth is 550 mm for all dies.

Can I order a custom window size?

Yes. Standard dies are 600 mm and 800 mm; other sizes can be made to order, 800 mm maximum.

How long does one panel take?

About 40 seconds per sheet, including heating and die cutting.

Does the window edge need trimming afterwards?

No. The edge is heat-sealed in the same pass, so there is no exposed core and no extra trimming step.

Specifications

Power supply380 V / 50 Hz
Power10 kW
Max window length800 mm
Max window depth550 mm (all dies)
Window pressure36 t total, single die
Cycle40 seconds per sheet, heating included
DiesTwo standard (600 mm, 800 mm); custom sizes up to 800 mm
ControlPLC + touch screen
HeatingFar-infrared carbon-fibre heaters

Need a quotation or a line layout? Send your panel size, thickness and target output.

Request a quoteWhatsApp