Home / Products / PP honeycomb panel sleeve box punching machine

PP honeycomb panel sleeve box punching machine

PP honeycomb sheet sleeve box punching machine · PP honeycomb panel sleeve box hole puncher

This machine is known by other names depending on who is asking — See all names.

The No.0 PP honeycomb sleeve box punching machine punches the locking or accessory holes in a panel that has already been banded or is waiting for assembly.

  • Stations2
  • Pitch400–1200 mm, adjustable
  • Stroke50 mm

Panels: PP honeycomb panels, plastic honeycomb panels, plastic hollow boards, rice-shaped and S-shaped hollow boards. Supplied by No.0 Machinery, Shanghai / Changzhou, China.

PP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machinePP honeycomb panel sleeve box punching machine

Overview

The No.0 PP honeycomb sleeve box punching machine punches the locking or accessory holes in a panel that has already been banded or is waiting for assembly.

Unlike edge banding, which works on the panel edge, punching works inside the panel face: it is a punching system for a sandwich structure — both skins are cut and the honeycomb core is separated cleanly, with a tidy hole and no deformation.

How it works

Four steps: feed and locate, clamp, punch through, unload and discharge.

Feed and locate: the panel enters the station and a mechanical stop aligns the hole position with the die. Clamp: before the punch moves, a clamping unit presses the panel onto the table — an unclamped panel shifts during punching, which causes an off-centre hole or a torn edge.

Punch through: an air-hydraulic cylinder drives the punch through the panel; the slug (skins plus core) is pushed into the discharge channel below. Multiple punches work together, so several holes are made in one stroke. Unload: on the return stroke a stripper holds the panel so it does not follow the tool, and the slugs drop into the collection box.

Processable panels

PP honeycomb panels, plastic honeycomb panels, plastic hollow boards, rice-shaped and S-shaped hollow boards

Typical industries

Packaging, automotive, electronics, electrical appliances

Machine advantages

Hole quality

  • Air-hydraulic punching with a die: standard hole shape, tidy edge
  • Multiple punches in one stroke: fewer re-positioning steps

Positioning and stability

  • Mechanical stop positioning: repeatable hole position in batch production
  • Clamp first, punch second: no shift, no torn edge

Structure and durability

  • Steel frame: stable, does not deform when moved
  • Stripper on the return stroke prevents the panel from sticking to the tool

Flexibility

  • Two stations, pitch adjustable 400–1200 mm for different window sizes
  • 2 dies, one per station; 8 t per station (16 t combined)
The No.0 punching machine makes holes that fit: right position, clean edge, no slug jam — one sheet in five seconds, ready for the next station.

Four problems in punching

Manual punching usually goes wrong in three ways: the hole is off position, the edge tears, and the slug jams in the die. The No.0 punching machine is designed around these points.

01

Air-hydraulic punching

5 seconds per sheet

An air-hydraulic cylinder drives the die down in one stroke: standard hole shape and a tidy edge without manual trimming; one panel takes about five seconds.

02

Clamp before punch

Accurate position, no tearing

The clamp presses the panel before the punch descends; with mechanical stop positioning the hole repeats accurately and the edge does not tear.

03

Adjustable pitch

400–1200 mm

The distance between the two stations is adjustable from 400 to 1200 mm, so different window sizes are covered by one machine without new fixtures.

04

Stripper and discharge

Slugs into the box

On the return stroke the stripper pushes the panel off the tool so it cannot jam; slugs fall through the discharge channel into the collection box for continuous production.

Summary: right position, clean edge, no jam.

FAQ

How many holes can be punched at once?

Two stations work together, with the pitch adjustable between 400 and 1200 mm; 8 t per station.

What panel thickness can be punched?

Panels from 0.5 to 30 mm, depending on hole size and die configuration.

How fast is one panel?

About 5 seconds per sheet for the standard two-station cycle.

Where do the slugs go?

A discharge channel leads them into a collection box below the machine, so production does not stop for cleaning.

Specifications

Stations2
Pitch400–1200 mm, adjustable
Stroke50 mm
Pressure8 t per station (16 t combined)
Dies2, one per station
Power supply220 V
DriveAir-hydraulic
Air pressure0.5–0.8 MPa
ControlAutomatic
Cycle5 seconds per sheet
Machine size1.2 × 1.8 × 1.5 m (height), waste box excluded

Need a quotation or a line layout? Send your panel size, thickness and target output.

Request a quoteWhatsApp