Home / Products / Plastic pallet sleeve box cutting machine

Plastic pallet sleeve box cutting machine

Plastic pallet sleeve box cutter · Plastic pallet coaming box cutter

This machine is known by other names depending on who is asking — See all names.

The No.0 PP honeycomb sleeve box head-and-tail cutting machine trims the irregular ends left by edge banding, so every panel of a sleeve box ends up exactly the same length.

  • Cutting methodBlade cutting
  • Stations2, both ends at once
  • Cutting length1.3–3.5 m (3-crease) / 1.3–6 m (6-crease)

Panels: PP honeycomb panels only — not suitable for plastic hollow boards or solid sheets. Supplied by No.0 Machinery, Shanghai / Changzhou, China.

Plastic pallet sleeve box cutting machinePlastic pallet sleeve box cutting machinePlastic pallet sleeve box cutting machinePlastic pallet sleeve box cutting machinePlastic pallet sleeve box cutting machine

Overview

The No.0 PP honeycomb sleeve box head-and-tail cutting machine trims the irregular ends left by edge banding, so every panel of a sleeve box ends up exactly the same length.

It does not seal edges and does not punch holes: it solves length and squareness, giving the following punching and creasing stations a reliable datum.

How it works

Four steps: stop and locate, clamp, cross-cut, discharge.

The banded panel is fed in by the conveyor; a limit stop sets the head end exactly on the blade line, which decides how much is trimmed and how accurate the final length is. A clamping bar then presses the panel onto the table: a honeycomb panel has limited stiffness, and an unclamped panel shifts or vibrates, giving a slanted cut, a ragged edge or a torn core.

Both blades descend together and cut across the width, so the two ends are parallel and the panel is square. The trimmed strips fall down a chute into a waste bin for recycling.

Processable panels

PP honeycomb panels only — not suitable for plastic hollow boards or solid sheets

Typical industries

Packaging, automotive, electronics, electrical appliances

Machine advantages

Cutting accuracy

  • Clamping bar plus limit stop: one cut sets the length, square and vertical edge
  • Hardened blades: clean cut, long blade life, cutting quality and speed together

Speed and cycle

  • Two stations cut both ends at once: no panel flipping, no second clamping
  • 45 seconds per panel, stable cycle in batch production

Size flexibility

  • Cutting length 1.3–3.5 m for 3-crease boxes, 1.3–6 m for 6-crease boxes
  • Cutting width 1.6 m, thickness 0.5–30 mm, matching the bending machine width
  • Manual or automatic length adjustment, no tool change between sizes

Line integration

  • Roller conveyor, can be installed directly after the edge banding machine
  • Waste strips go into a bin for recycling, no manual cleaning of the table
The No.0 cutting machine is all about one cut: both ends trimmed at once, every panel the same length and square — the accuracy of every following crease starts here.

Four problems in manual head-and-tail cutting

Cutting head and tail by hand is slow, every size change means measuring again, the two ends are not parallel, and the panel still has to be carried away. The No.0 cutting machine solves all four.

01

Both ends in one cut

No manual back-and-forth

Both ends are cut in one stroke: no panel flipping and no second clamping; the cutting time per panel drops and the cycle stays stable.

02

Adjustable length

1.3–6 m in two ranges

1.3–3.5 m for 3-crease boxes and 1.3–6 m for 6-crease boxes; switching sizes needs no blade change and no machine modification — manual or automatic adjustment.

03

Two blades together

Parallel ends, square panel

Two blades descend and cut at the same time, so both ends are parallel and the panel is square; following creasing and banding align more accurately and less waste is produced.

04

Roller conveyor

Directly after the banding machine

A roller conveyor links the machine behind the edge banding station, so the panel flows on without being carried or stacked, and handling marks are reduced.

Summary: one cut, two ends — square and fast.

FAQ

What panel length can be cut?

1.3–3.5 m for boxes with 3 creases and 1.3–6 m for boxes with 6 creases.

What panel thickness is supported?

0.5–30 mm, and the panel width up to 1.6 m.

Can it cut hollow boards or solid sheets?

No. This model is designed for PP honeycomb panels only.

How long does one panel take?

About 45 seconds per panel, both ends cut in one pass.

Specifications

Cutting methodBlade cutting
Stations2, both ends at once
Cutting length1.3–3.5 m (3-crease) / 1.3–6 m (6-crease)
Cutting width1.6 m
Cutting thickness0.5–30 mm
Cycle45 seconds per panel
Length adjustmentManual or automatic
Conveyor power750 W
Cutting power750 W
PanelsPP honeycomb panels only

Need a quotation or a line layout? Send your panel size, thickness and target output.

Request a quoteWhatsApp