Home / Products / PP honeycomb panel sleeve box loading machine

PP honeycomb panel sleeve box loading machine

PP honeycomb panel coaming box loading machine · PP honeycomb sheet sleeve box loading machine · PP honeycomb panel sleeve box feeder

This machine is known by other names depending on who is asking — See all names.

The No.0 PP honeycomb panel gantry loading machine stands at the very front of a sleeve box line: it separates panels from a stack, grips them reliably and places them on the conveyor in the right orientation.

  • Max load100 kg
  • StrokeX / Y / Z made to order
  • Panel size1.6 × 3.5 m (3-crease) / 1.6 × 6 m (6-crease)

Panels: PP honeycomb panels mainly, plus plastic hollow boards. Supplied by No.0 Machinery, Shanghai / Changzhou, China.

PP honeycomb panel sleeve box loading machinePP honeycomb panel sleeve box loading machinePP honeycomb panel sleeve box loading machinePP honeycomb panel sleeve box loading machinePP honeycomb panel sleeve box loading machinePP honeycomb panel sleeve box loading machine

Overview

The No.0 PP honeycomb panel gantry loading machine stands at the very front of a sleeve box line: it separates panels from a stack, grips them reliably and places them on the conveyor in the right orientation.

It does not change the panel size or shape — it converts a stack into single sheets that the following stations can accept. Honeycomb panels are light, thin-skinned and hollow-cored, and stacked sheets tend to stick together, so the real challenge is picking up exactly one sheet and placing it accurately.

How it works

Five steps: stack in position, separate, vacuum grip, lift and traverse, place.

The suction frame moves above the top sheet; because panels stick together, a separation device makes sure only one sheet is taken. Vacuum cups then grip the sheet from above, with cup groups switched by panel width so there is enough holding force without empty cups.

The frame lifts the sheet along the vertical guide and traverses it to the conveyor inlet; servo drives keep the motion smooth so the sheet does not swing or slip. At the target position the vacuum is released and the sheet is placed; the gantry returns for the next cycle.

Processable panels

PP honeycomb panels mainly, plus plastic hollow boards

Typical industries

Packaging, automotive, electronics, electrical appliances

Machine advantages

Structure and layout

  • Gantry frame with a wide span between the stack and the line
  • Four-leg, three-leg, side two-leg or cantilever versions to suit the floor space
  • Site survey before the model is fixed — no need to rebuild the workshop

Gripping and separation

  • High-power servo drive: grip and lift speed match panel weight and thickness
  • Multi-cup zoning by panel width: enough force, no empty cups
  • Maximum load 100 kg, with optional blow-off for quick release

Accuracy and cycle

  • X/Y positioning and Z lift with servo and rack-and-pinion drive
  • 40 seconds per sheet; size changes need parameter changes only
  • Lift height and gripping size adjustable, no new fixtures

Line integration

  • Automatic pushing synchronised with the edge banding machine
  • Touch screen + PLC control with signal exchange to the line
  • One operator can look after several machines
The No.0 loading gantry solves the last metre from stack to line: one sheet at a time, every sheet placed accurately — panels come in, nobody bends down.

Four problems in manual loading

Manual loading costs the most in four places: a panel weighs tens of kilos, a slow loader keeps the banding machine waiting, every workshop has a different height and width, and a size change means new fixtures. The No.0 loading gantry removes all four.

01

High-power servo

Any weight and thickness

Servo drive matches grip and lift speed to panel weight and thickness: thin panels are not deformed, thick panels do not slip, and sheets are fed one by one.

02

Automatic pushing

Synchronised with banding

Pushing is interlocked with the host machine cycle: panel in, push out, return. The loading point needs no dedicated operator and one person can look after several machines.

03

Several structures

Fits the floor space

Four-leg, three-leg, side two-leg and cantilever versions cover low ceilings, narrow aisles and long lines — the machine is chosen after a site survey, not the workshop after the machine.

04

Adjustable lift

New size, new parameters

Lift height and gripping size are adjustable, so a change of panel length, width or stack height needs only parameter changes — no new fixture, and mixed production runs smoothly.

Summary: panels come in, and they are gripped — whatever the size.

FAQ

How much weight can it lift?

Up to 100 kg per sheet, with the vacuum cup layout adapted to the panel size.

What panel size can it handle?

1.6 × 3.5 m for 3-crease boxes and 1.6 × 6 m for 6-crease boxes.

How fast is one cycle?

About 40 seconds per sheet, including separation, gripping, traverse and placing.

Can the stroke be customised?

Yes. X, Y and Z strokes are made to order according to the layout of the line.

Specifications

Max load100 kg
StrokeX / Y / Z made to order
Panel size1.6 × 3.5 m (3-crease) / 1.6 × 6 m (6-crease)
Cycle40 seconds per sheet
Air supply0.6 MPa
Power3 kW
StructureGantry: four-leg, three-leg, side two-leg; or cantilever
Axes3-axis (X/Y/Z) or 2-axis (X/Y positioning + Z lift)
DriveServo motors with rack and pinion
End effectorVacuum cup array with optional blow-off
ControlTouch screen + PLC, handshake with the line

Need a quotation or a line layout? Send your panel size, thickness and target output.

Request a quoteWhatsApp