Home / Products / PP Honeycomb Board Pallet Sleeve Box Round Edge Sealing Machine

PP Honeycomb Board Pallet Sleeve Box Round Edge Sealing Machine

PP Honeycomb Coaming Box Round Edge Sealing Machine · Round Edge Banding Machine for PP Honeycomb Sleeve Box

This machine is known by other names depending on who is asking — See all names.

The No.0 round edge banding machine (arc edge banding machine) works on the rounded corners of a sleeve box: it rolls the softened edge into a smooth, closed band, so the corner does not cut hands, does not split and can be folded many times.

  • Power supply380 V
  • Power24 kW
  • Banding width0.3–1.5 m

Panels: PP honeycomb panels. Supplied by No.0 Machinery, Shanghai / Changzhou, China.

PP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing MachinePP Honeycomb Board Pallet Sleeve Box Round Edge Sealing Machine

Overview

The No.0 round edge banding machine (arc edge banding machine) works on the rounded corners of a sleeve box: it rolls the softened edge into a smooth, closed band, so the corner does not cut hands, does not split and can be folded many times.

It complements the straight edge banding machine: the straight machine handles the four flat edges, the round machine handles the arc corners. Stress concentrates at the corner, so this is the station that decides how a box looks and how long it lasts.

How it works

Self-sealing by heat, without tape or glue: the panel's own plastic softens and is pressed into a closed edge.

Four steps: feed, heat, press, trim. The panel is fed along the track and the arc section is guided by a set of guide rollers; both edges are heated by eight heat sources (four per side) with adjustable temperature and distance, each zone independently controlled.

Pressing rollers or dies with a gap smaller than the panel thickness close the two skins; four sealing stations work together, and 4-point mechanical synchronisation keeps the line speed identical so the panel does not drift and the band width stays even on the arc.

Processable panels

PP honeycomb panels

Typical industries

Packaging, automotive, electronics, electrical appliances

Machine advantages

Line integration

  • Fully automatic banding: feed, heat, band and cut in one flow, speed adjustable
  • Double-sided operation with high-temperature, high-pressure belts keeps both edges symmetrical

Heating system

  • Four heating steps, both edges at constant temperature; temperature and distance adjustable
  • 8 heat sources (4 per side) in independent zones: energy saving and even heat on mixed thickness
  • Heating time and power set separately per material and thickness

Structure and accuracy

  • Steel frame: stable, does not deform when moved
  • Guide rollers follow the arc point by point, so the corner transition is smooth with no burr
  • 4-point mechanical synchronisation: no drift, even band width on the arc

Finish and safety

  • Hot-melt roller forming: smooth, strong, gap-free band for repeated use
  • Cool-down after stop protects control components from residual heat
The No.0 round edge banding machine is built for arc corners: eight heat sources soften the edge, guide rollers follow the curve and 4-point synchronisation keeps the panel straight — the arc runs smooth and the edge closes round.

Four problems in arc edge banding

Arc banding is harder than straight banding: it is slower, the corner is not smooth, residual heat damages the machine after a stop, and the panel drifts. The No.0 round edge banding machine addresses these four points.

01

Four heater groups per side

5 m/min, smooth arc

Eight heat sources, four per side, in independent zones: the panel keeps receiving heat as it moves, so the arc can be banded at up to 5 m per minute and the corner stays tight without lifting.

02

Guide rollers

Smooth corner transition

Guide rollers follow the arc point by point so the panel passes the curve steadily; the finished corner is smooth and burr-free, the box looks tidy and does not cut hands.

03

Cool-down after stop

Protects the control parts

Heaters stop first, then the unit cools: residual heat cannot flow back and damage control components or heating elements.

04

4-point synchronisation

No drift, even arc width

A timing belt with 4-point mechanical synchronisation keeps line speed identical at all four points; the panel does not drift or skew and the arc band width stays even on thin and thick panels.

Summary: the arc runs smooth and the edge closes round.

FAQ

What is the difference from the straight edge banding machine?

The straight machine bands the four flat edges; this model bands the arc corners. Both use hot-melt self-sealing without tape or glue.

What width and thickness can it band?

Banding width 0.3–1.5 m, maximum panel thickness 20 mm; 8 heat sources and 4 sealing stations, up to 5 m/min.

Which panels can be processed?

PP honeycomb panels, which are the standard material for sleeve boxes.

Is corner rounding included?

The arc is formed by the guide rollers and pressing unit, so the corner comes out smooth without a separate rounding step.

Specifications

Power supply380 V
Power24 kW
Banding width0.3–1.5 m
Max panel thickness20 mm
Sealing stations4
Heat sources8 (4 per side)
Banding methodHot-melt self-sealing, no tape, no glue
SpeedUp to 5 m/min
FrameSteel frame
ConveyorHigh-temperature high-pressure belt with 4-point synchronisation
PanelsPP honeycomb panels

Need a quotation or a line layout? Send your panel size, thickness and target output.

Request a quoteWhatsApp